Configuring The Context To Network Entity Mapping - Cisco Nexus 3548 Configuration Manual

Configuring the Context to Network Entity Mapping

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Configuring the Context to Network Entity Mapping
You can configure an SNMP context to map to a logical network entity, such as a protocol instance or VRF.
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
132
Command or Action
switch# configuration terminal
switch(config)# snmp-server contact
name
switch(config)# snmp-server location
name
switch# show snmp
switch# copy running-config
startup-config
Command or Action
switch# configuration terminal
switch(config)# snmp-server context
context-name [instance instance-name]
[vrf vrf-name] [topology topology-name]
switch(config)# snmp-server mib
community-map community-name
context context-name
switch(config)# no snmp-server context
context-name [instance instance-name]
[vrf vrf-name] [topology topology-name]
Purpose
Enters global configuration mode.
Configures sysContact, the SNMP contact name.
Configures sysLocation, the SNMP location.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Saves this configuration change.
Purpose
Enters global configuration mode.
Maps an SNMP context to a protocol instance, VRF,
or topology. The names can be any alphanumeric string
up to 32 characters.
Maps an SNMPv2c community to an SNMP context.
The names can be any alphanumeric string up to 32
characters.
(Optional)
Deletes the mapping between an SNMP context and a
protocol instance, VRF, or topology. The names can
be any alphanumeric string up to 32 characters.
Do not enter an instance, VRF, or topology to
Note
delete a context mapping. If you use the
instance, vrf, or topology keywords, you
configure a mapping between the context and
a zero-length string.
Configuring SNMP