Since the early 1900s, Monark’s cycles have been living proof of precision, reliability, strength and service. That are the reasons why we are now the world leader in cycle ergometers and the market leader in Scandinavia in transport cycles.
Congratulations on your new exercise bike! • 808 without freewheel, 809 with freewheel • Heavy, well-balanced flywheel The exercise cycle Monark Sparr Rehab 808/809 is • Adjustable saddle and handlebar designed for stimulation of movements, resistance of • Electronic display that shows speed, distance, circulatory systems and and also prevent contractures.
Operating Instruction Workload adjustment Monark Sparr Rehab 808 and 809 are both fitness and rehabilitation bikes that are equipped with adjustable workload. Model 808 is equipped with a sprocket, model 809 is equipped with a sprocket on the crank. The bikes are also equipped with a meter that shows pedal revolutions, intended cycling speed in km per hour and the distance in km.
Fig: Battery replacement Do not expose the electronic meter to direct sunlight or extremely high temperature. Do not use any dissolvents when cleaning. Use only dry cloth. Monark 808/809...
Heart Rate Replacement of the sprocket model 808 If chest belt is used (acessory). Lift off the wheel A person's heart rate can be measured with a chest Dismantle the axle nut, chain tensioner and spacer belt that senses the electronic output of the heart. The on the sprocket side chest belt is available as an accessory.
The base bearing is loose. Contact your dealer for service. Scratching sound is heard when pedalling. Check that the carriage block is taken off and that none of the covers is scratching. There is a click noise and a squeak noise Loosen the chain. when pedalling. Monark 808/809...
EC Directive 1999/44/EC. In short, be damaged. Also check that pedal arms are firmly the directive states for that your Monark Dealer will tightened on the crank axle, tighten if necessary. be liable for any defects, which existed at the time of When the Ergometer is new it is important to tighten delivery.
See ”Brake belt contact The crank bearing is long term greased and require surface”. normally no supplementary lubrication. If problem arises, please contact your Monark dealer. Brake belt contact surface Flywheel bearing Deposits of dirt on the brake belt and on the contact...
Otherwise the chain and sprockets makes a lot of noise and wears out rapidly. Fig: Chain replacement 4) Lock spring 5) Movement direction Then assemble the removed details as above but in 6) Chain lock reverse order. Monark 808/809...
The sprocket should be lubricated with a few drops of oil once a year. Tilt the cycle to make it easier for the oil to reach the bearing. See Fig: Lubrication. Fig: Lubrication Fig: Hub assembly Fig: Special remover (Art. no: 9100-14) Monark 808/809...
Need help?
Do you have a question about the 808 and is the answer not in the manual?
Questions and answers