Timer Settings; Changing Mode From Auto To Manual - Danfoss DHP-AT User Manual

User Guide
7.6

Timer settings

The heat pump can start and stop according to timer settings in the control system.
Setting Timer ON
1. To set Timer ON, press
2. Use
or
3. Press
again.
4. Use
or
5. Press
before the flashing stops or wait 5 seconds.
Setting Timer OFF
1. To set Timer OFF, press
2. Use
or
3. Press
again.
4. Use
or
5. Press
before the flashing stops or wait 5 seconds.
Cancelling Timer settings
1. To cancel timer settings, press either
2. Press
before the flashing stops.
7.7

Changing mode from AUTO to MANUAL

1. To change from AUTO to MANUAL mode, press
2. Press
or
3. Press the
again.
4. Press
to select value 0 for MANUAL mode.
5. Press
again or wait 5 seconds.
6. To lock the mode, press
Danfoss Heating Solutions
DHP-AT
.
buttons to change the default hour setting for Timer ON.
buttons to change the default minute setting for Timer ON.
.
buttons to change the default hour setting for Timer OFF.
buttons to change the default minute setting for Timer OFF.
or
to navigate to Menu 02.
for 5 seconds.
.
for 5 seconds.
VUGFC302
17