Removing And Replacing An Antenna - HPE EDGELINE EL10 Maintenance And Service Manual

5. Using a T-10 Torx screwdriver, remove the screws securing the WiFi module to the gateway.
6. Remove the WiFi module.
To replace the component, reverse the removal procedure.
You must press the Power On/Off button twice to power on the system.

Removing and replacing an antenna

Procedure
1. Power down the gateway.
2. Dismount the gateway.
3. Locate the correct antenna. The rear access label includes indication of which antenna pair is for 3G
and which antenna pair is for WiFi.
24 Removing and replacing an antenna