Always make sure to check for any loose screws or parts, and that the airframe is free from damage that may cause failure in flight. HobbyKing is not responsible for any injury or property damage inflicted due to negligence in assembly or maintenance.
Page 3
Airframe Assembly Airframe Assembly 5) Glue vertical fin to fuselage after attaching horizontal stabilizer. Apply glue into slot on stablizer. 1) Attach tail boom assembly to the forward fuselage section with two M4 x 90mm, and two M4 x Do not apply excess glue. Attached rudder control rod to control horn. 70mm machine screws.
Airframe Assembly Connecting The Battery 12) Insert your flight battery into the battery tray and secure with velcro strap. After turning on your transmitter, plug in the battery to the ESC to arm the whole radio system. After the radio has armed, plug the auto-start connector into the balance plug of your battery.
Charging and discharging batteries has the potential for serious injury to persons and damage to property. In purchasing this product, the user agrees to accept responsibility for all such risks, and will not hold HobbyKing, it’s affiliates, manufacturers or distributors, responsible for any accident, injury to persons, or damage to property resulting from the use of this product.
Trouble Shooting Spare Parts List Problem Solution Model constantly rolls right with limited 1) Rotor is not pre-angled at 7 degrees control left. Use supplied setup jig. Model will not climb 1) Batteries need to be recharged. 2) Model is noseheavy, check CG. 9310000238-0 9310000239-0 9310000240-0...
Need help?
Do you have a question about the SuperG and is the answer not in the manual?
Questions and answers