Using Individual Value Storage; Using Measurement Series Storage - TESTO 816-1 Instruction Manual

5 Using the product
5.10.

Using individual value storage

Storing an individual value
> Press the
-
the next available memory address.
Displaying a stored individual value
> Press the
-
individual value storage and the memory address are displayed.
> Switch between individual memory addresses using the
- If memory addresses have not yet been allocated,
displayed instead of the reading.
Deleting an individual value memory
1. Switch the instrument off.
2. Hold down the
- While the keys are held down:
and a countdown (5 seconds) starts.
3. Once the countdown is complete, release the keys.
- The memory is deleted.
5.11.

Using measurement series storage

Setting the storage interval
1. Press the
2. Use the
(minimum: 1 second, maximum 1 minute).
3. Press the
20
key.
lights up briefly and the individual value is stored under
key.
lights up. The individual value of the most recent
keys.
key and the
key.
and keys to set the interval (in seconds)
key again.
key.
CLr is displayed,
and
00 is
SURE flashes