Exchange Access Code - ASCOM Eurit 22 Operating Manual

Operation with a PBX

Exchange access code

For operation with a PBX without automatic external line selection, the exchange access code
may have to be set.
Enter the digits to be used as an exchange access code for external calls.
If you have defined a public exchange access code, then in the directory (as well as with
numbers for speed dialling) the prefix but not the access code must be entered. For
emergency calls enter the special character " X" (access code must be entered) in front of
the number Also see " Speed dialling" .
Only if you have defined an access code, internal and external calls are discriminated
automatically
When dialling using the keypad, the exchange access code is not dialled automatica&
Press G&J. Press C3Il as often a5 necessary until
Press m as often as necessary until "PBX" is
displayed. Press I.
The message "ACCESS CODE" is displayed.
P r e s s I .
Enter the access code (max. 4 digits) and confirm
by pressing I.