Define A User - ASCOM Eurit 22 Operating Manual

You can define up to three users on your Eurit 22, with each user being allocated their own
Multiple Subscriber Number (MSN A, B, C). Your telephone will ring when a call is received for
one of the defined numbers.
When the telephone leaves the factory no users are defined and your Eurit 22
will ring for all incoming calls.
In order to be able to use the full range of Eurit 22 functions,
In order to define a user proceed as follows:
Caution: always enter MSN without prefix!
When a call is received your Eurit 22 recognizes for which user it is and indicates this by
different ringing melodies (see "Ringing tone" and "Incoming calls").
With a// outgoing calls, the Multiple Subscriber Number of the active user is sent to the
called party If you do not want the Multiple Subscriber Number for a particular user to
be displayed on the called party' s telephone, you can suppress this (see " Suppress line
identification I').
A user can be deleted by deleting his MSN.
A
must be defined!
Press @. and then press IZI as often as necessary
until "INSTALLATION" is displayed. Confirm the
menu selection by pressing l3Kl.
The message ' SET MSN" is displayed. Confirm by
pressing I.
for MSN A and confirm by pressing IOK
"USER _' I is displayed. Using the dialling keypad,
enter the name associated with MSN A and
confirm by pressing I.
Correct entry is indicated by a short signal tone.
Press m to change to the menu for defining
MSN B.
MSN B and C can be defined by repeating the
procedure described for MSN A.
10