Table of Contents
Advertisement
General information
Which discs can be used?
There is a great number of disc types and you can use
many of them on your DVD recorder system. Some can be
used for playback only, others for playback and recording,
but there are a few types of discs which cannot be used
with this DVD recorder system.To determine which discs
you can use on this DVD recorder system, refer to the
logos shown below and look for these logos on your discs.
Discs for playback only
– DVD-Video
– DVD-R
plays only if it contains
DVD Video and if
finalised.
– DVD-RW
plays only if it contains
DVD Video and if
finalised.
– Video CD,
Super Video CD
– Audio CD
– Audio CDR, Audio CDRW
plays only if finalised.
– CDR, CDRW
plays only Audio CD
tracks and MP3 files
if finalised.
6
Discs for playback and recording
– DVD+R
can be recorded once and played
on standard DVD players and
DVD recorders, if finalised.
– DVD+RW
can be recorded, erased and
re-recorded many times and played on
DVD+RW compatible DVD players
and DVD recorders if finalised.
Discs unsuited for playback or recording
– DVD-RAM
– DVD-Audio
Region code
DVDs and DVD players are released for specific
regions around the world.To play a DVD on this
DVD recorder system, the DVD must be labelled
– for all regions or
– for the region shown on the
bottom of this set,
e. g. Region 2 or Region 5, etc.
You cannot play DVDs which are labelled for other
regions.
Regional coding is not applicable for recordable DVD discs.
Trademark and license
information
ShowView is a registered
trademark of Gemstar
Development Corporation.
The ShowView system is manufactured under license from
Gemstar Development Corporation.
Manufactured under license from
Dolby Laboratories."Dolby",
"Pro Logic", and the double-D symbol
are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are
registered trademarks of Digital Theater
Systems, Inc.
See type plate, license, trademark and
warning notices on the bottom of the set.
Advertisement
Table of Contents
