Table of Contents
Advertisement
System settings
Additional TV channel settings
You can change the name of a TV channel. If the reception
of a TV channel is poor, you can change the "TV system",
switch off Stereo/2-channel sound and change the tuning of
the TV channel slightly.
1
Press DVD/MON as often as necessary to see the
TV channel currently selected on the DVD recorder
system.
2
Press CH + or CH – or 0–9 repeatedly to select a
TV channel on the DVD recorder system.
3
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
4
Press 4 or 3 as often as necessary to select
5
y Installation. Next, press 2 to confirm.
Press 4 as often as necessary to select Manual search.
6
Next, press 2 to confirm.
Installation
Manual search
Channel/freq.
Entry/search
Programme number
TV channel name
Decoder
TV system
NICAM
Fine tuning
Press 4 repeatedly to select either
7
TV channel name: to set the TV channel name,
Decoder: to decode an encoded TV channel. See "Using
a decoder to decode a TV channel",
TV system: to change the TV system of the TV channel,
NICAM: to switch NICAM on/off,
Fine tuning: to change the tuning of the TV channel
slightly.
52
CH
48
07
PHI
On
PAL-BG
On
0
To exit press
SYSTEM MENU
TV channel name
Press 2 repeatedly to select a character of the TV channel
1
name.
Press 3 or 4 repeatedly to set/change the desired
2
character.
Repeat steps 1 and 2 for all characters of the channel
3
name.
Note: Channel names are limited to 5 characters.
4
Press OK to store the TV channel name.
5
Press SYSTEM MENU to end.
TV system
If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
Press 2 repeatedly to select the TV system (PAL-BG,
1
PAL-I, PAL-DK, SECAM, SEC-BG, SEC-DK) which
produces the clearest sound and picture on your TV.
Note: If you change TV system to a setting not supported by
your TV set, the picture and/or sound may be missing.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
NICAM
Press 2 repeatedly to switch NICAM on or off:
1
On: Stereo and 2-channel sound is supported.
Off:To improve the sound quality of a weak TV channel,
only mono sound is supported.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
Fine tuning
If the reception of the TV channel is distorted, press 3 or
1
4 repeatedly to change the tuning of the TV channel
slightly.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
Advertisement
Table of Contents
