Table of Contents
Advertisement
Settings for a disc
Press STOP 9 when playback is stopped or press
1
DISC MENU during playback.
Press 3 as often as necessary until you reach the first title
2
of the disc menu.
Press 3 again.
3
The disc info screen appears.
Unlocked
PAL
DVD playback
Edits
15:06 hr
07 3SAT
The disc info screen shows
– the name of the disc,
– the TV system of the disc (PAL or NTSC),
– if the disc is write protected (Locked or unlocked)
– if the edits you´ve done on this disc will be available on
another DVD player.
To exit the disc info screen press 4.
0 0
Press 2 to enter the menu Settings for My DVD.
4
Settings for My DVD
Disc name
Protection
Erase disc
Make edits compatible
In the menu Settings for My DVD you can
– change the disc name,
– activate or deactivate the write protection,
– erase a DVD+RW,
– prepare a DVD+R or DVD+RW for playback on
another DVD player (Finalise disc or Make edits
compatible).
My DVD
02:25:03 used
Tue 25/03/2004
My DVD
Unprotected
Press OK
Changing the disc name
(DVD+R, DVD+RW)
1
Select the Settings for menu. See "Settings for a disc".
Press 4 or 3 as often as necessary to select the lineDisc
2
name. Next, press 2 to enter the menu.
Use 1 or 2 to move to the character to be deleted or
3
substituted.
The character is highlighted.
Use 4 or 3 or the number buttons to select a new
4
character, symbol or number.
To switch between upper and lower case press SELECT.
0 0
To delete a character press CLEAR.
0 0
5
Repeat steps 3–4 until the name of the recording is
changed as desired.
6
Press OK to confirm the new name.
Storing name is displayed.
Press 1 to end.
7
Activating or deactivating the
write protection
You can prevent a recording on a DVD+RW disc from
accidental erasure by protecting it. However, the protection
can be activated for the entire disc only. An individual
recording cannot be protected. DVD+R discs can be
protected the same way as DVD+RW discs as long as they
are not finalised.
1
Select the Settings for menu. See "Settings for a disc".
Press 4 or 3 as often as necessary to select the line
2
Protection.Next, press 2 to enter the menu.
Press 4 or 3 as often as necessary to select either the line:
3
Unprotected: for deactivating the write protection
Protected: for activating the write protection
4
Press OK to confirm.
Press 1 to end.
5
Editing a disc
41
Advertisement
Table of Contents
