Table of Contents
Advertisement
System settings
Input settings
The DVD recorder system allows you to connect a varity
of equipment: a satellite receiver or set-top box, a VCR, a
CD player etc. Please set to which input sockets you
connected the equipment.
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
3
Press 4 or 3 as often as necessary to select
4
y Installation. Next, press 2 to confirm.
Press 4 or 3 as often as necessary to select Audio Video
5
Input. Next, press 2 to confirm.
Installation
Audio video input
SAT
VCR
GAME
TV
TAPE
CDR
CD
Press 4 as often as necessary to select SAT,VCR, GAME or
6
TV, CD, CDR,TAPE.
7
Perform the following settings for the selected source.
54
>
>
>
< EXT1 >
< LIN2 >
< LIN1 >
< DIG >
To exit press
SYSTEM MENU
Settings for SAT,VCR, GAME
For each of these AV sources you can do two settings:
– AV source: Select the input to be used for recording
from the equipment or for playing its sound.
– Additional audio: Select the input which should be
used preferably for playing the sound of the equipment.
E. g. if you connected the equipment to one of the digital
audio inputs to enjoy digital surround sound on the
DVD recorder system.
If you did not connect this kind of equipment, select None
for both, AV source and Additional audio.
Press 2 to enter the menu.
1
AV Source is highlighted.
Installation
VCR
AV Source
Additional Audio
Press 2 as often as necessary to select
2
– EXT1 or EXT2: the AV input to which you connected
the equipment.The DVD recorder system will use this
input for recording from the equipment.
– None: if you did not connect this kind of equipment or
if you connected it to one of the audio inputs only. In this
case, recording from the equipment is not possible.
Press 4 to select Additional Audio.
3
Press 2 as often as necessary to select
4
– DIG or OPT: if you connected the digital audio output
of the equipment to IN DIGITAL or IN OPTICAL.
You need a digital connection to play digital (surround)
sound on the DVD recorder system.
– None: if you did not connect the equipment at all or if
you did not connect it to IN DIGITAL or IN OPTICAL.
– LIN1, LIN2 (only available if you selected None for
AV Source above): if you connected the audio output
of the equipment to LIN1 or LIN2 without a video
connection to the DVD recorder system.
5
Press OK to store the settings or SYSTEM MENU to exit
without storing.
EXT2
<None>
To exit press
SYSTEM MENU
Advertisement
Table of Contents
