Table of Contents
Advertisement
s Disc features
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
3
Press 4 or 3 as often as necessary to select
4
s Disc features. Next, press 2 to confirm.
A
B
2
s
Access control
z
Auto resume
y
Press 4, 3 as often as necessary to select the desired
5
function.You can choose following functions:
Access control
Restrict the playback of certain discs. See chapter "Access
control" on pages 43–45.
Auto resume
If playback was interrupted on a pre-recorded DVD-Video
disc or Video CD disc, playback will start after reloading at
exactly the same position where it was interrupted.This
applies not only to the current disc but to the last 20 discs
played.
On:The function is switched on.
Off:The function is switched off.
PBC
This line only appears if a (Super) Video CD is inserted.
With this setting you can activate or deactivate the PBC
menu. See "Playing a (Super) Video CD".
Finalise disc (available only for unfinalised DVD+R discs)
To finalise a DVD+R. See also "Finalising a DVD+R disc" on
page 42.
Adapt disc format
If a DVD+RW has been recorded in a computer drive or
another DVD recorder, the index picture screen may not
be displayed correctly.This feature allows you to change the
disc format and thus correct the problem.Visible only if the
disc format of the inserted DVD+RW can be changed.
C
D
E
F G
17
off
off
no
Disc features
Enter code...
Off
z Record settings
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
3
Press 4 or 3 as often as necessary to select z Record
4
settings. Next, press 2 to confirm.
off
Press 4, 3 as often as necessary to select the desired
5
function.You can choose following functions:
Record mode
See "Selecting the recording mode via the menu" in chapter
"Selecting the recording mode".
Direct Record
See separate chapter "Direct Record".
Sat record
See separate chapter "Automatic recording from a satellite
receiver".
Auto chapters
If this function is activated a chapter marker will be set
automatically every 5–6 minutes during recording. Chapter
markers can be changed when the recording has been
finished.
On:The function is activated.
Off:The function is deactivated.
Filter mode
See "Selecting the recording mode via the menu" in chapter
"Selecting the recording mode".
Press 1, 2 as often as necessary to select the desired
6
setting.
7
Press OK to confirm the new setting.
8
Press SYSTEM MENU to end.
System settings
Record settings
Record mode
M2
Direct Record
On
Sat record
Off
Auto chapters
On
Filter mode
Stndrd
To exit press
SYSTEM MENU
49
Advertisement
Table of Contents
