Table of Contents
Advertisement
Recording
Safe record
When you start recording on a DVD+RW disc by pressing
RECORD on the DVD recorder system or REC/OTR once,
a recording will be made from the current position.To
prevent this you can do a safe record, which means starting
the recording at the end of all existing recordings.
Keep REC/OTR pressed until SAFE RECO is displayed.
Recording starts at the end of all existing recordings.
Note: A new recording on a DVD+R disc will always be added
at the end of all previous recordings as existing recordings
cannot be overwritten.
30
Recording with automatic stop
(OTR - One Touch Recording)
When you start recording, you can choose a certain
recording time. After this time has elapsed, your recording
will be stopped automatically.
1
Press REC/OTR to start recording from the current
position.
Recording starts.The actual recording time left is displayed.
2
Press REC/OTR again to choose a recording time of
30 minutes.
To prolong the recording time, press REC/OTR again.
0 0
Each time you press REC/OTR, 30 minutes will be added.
The actual recording time left is displayed.
To cancel the set recording time, press CLEAR while the
0 0
recording time is displayed.
3
After the chosen time has elapsed, recording stops
automatically.
Lining up recordings within a title –
assemble cut (DVD+RW discs only)
On a recorded DVD+RW, you can add a further recording
to an already existing title.The recording will be added to the
title as chapter(s). All existing recordings will be
overwritten from the chosen insert position onwards.
Depending on the length of the added recording, this
can also overwrite titles which follow the current title.
The recording mode will be automatically taken over from
the current title.
1
Load the appropriate DVD+RW disc.
2
Press DISC MENU.
The index picture screen appears.
Press 4 or 3 as often as necessary to select the desired
3
title for adding a further recording.
Press PLAY 2 to start playback.
4
Press PAUSE ; to mark where the new recording is to go.
5
The shown still picture is the selected starting point.
6
Select the source from which you want to record.
7
Press REC/OTR to start inserting the new recording.
Press STOP 9 to stop recording.
8
Advertisement
Table of Contents
