Editing A Recording; Changing The Name Of A Recording; Erasing An Entire Recording/Title - Philips LX7500R/01 User Manual

Dvd recorder home theater system
Hide thumbs Also See for LX7500R/01:
Table of Contents

Advertisement

Changing the name of a
recording
After the recording has been made, you can change the
name of the recording.
Press STOP 9 when playback is stopped or press
1
DISC MENU during playback.
Press 4 or 3 as often as necessary to select the desired
2
title for editing.
Press 2 to confirm the selection.
3
The editing menu appears.
Press 4 or 3 as often as necessary to select the line
4
Name.
Press 2 to confirm the selection.
5
Use 1 or 2 to move to the character to be deleted or
6
substituted.
The character is highlighted.
Use 4 or 3 or the number buttons to enter a character.
7
To switch between upper and lower case press SELECT.
0 0
To delete a character press CLEAR.
0 0
8
Repeat steps 6–7 until the name of the recording is
changed as desired.
9
Press OK to confirm the new name.
Storing name is displayed.
Press 1 to exit the editing menu.
10

Editing a recording

Erasing an entire recording/title

You can erase an entire recording/title from a DVD+RW or
an unfinalised DVD+R.The position of a deleted title on a
DVD+RW can be used for a new recording. However, a
deleted title on a DVD+R is only marked as deleted, but
not physically deleted.This means the deleted title will be
skipped during playback, but no new recording can be
made. Once the DVD+R has been finalised no further
changes can be made.
Press STOP 9 when playback is stopped or press
1
DISC MENU during playback.
Press 4 or 3 as often as necessary to select the desired
2
title for erasing.
Press 2 to confirm the selection.
3
The editing menu appears.
Settings for title Philips 1
Name
Play full title
Erase this title
Press 4 or 3 as often as necessary to select the line Erase
4
this title.
5
Press OK to confirm.
This will completely erase this title and Press
OK to confirm is displayed.
6
Press OK again to erase the entire recording/title.
Erasing title is displayed.
Afterwards Empty title (if you inserted a DVD+RW)
or Deleted title (if you inserted a DVD+R) is displayed
in the index picture screen.
Note: If the deleted title was shorter than 1 minute Empty
title or Deleted title will not be displayed.
To exit the editing menu without erasing press 1.
0 0
Philips 1
Press OK
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx7500r/04Lx7500r

Table of Contents