Table of Contents
Advertisement
System settings
w Features
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
3
Press 4 or 3 as often as necessary to select w Features.
4
Next, press 2 to confirm.
A
B
2
t
Status box
u
Standby
Display
w
x
Press 4, 3 as often as necessary to select the desired
5
function. Next, press 2 to confirm.
Press 4, 3 as often as necessary to select the desired
6
setting.You can choose as follows:
Status box
With OSD (On Screen Display) not only screen menus,
but also information on the current operating status
(counter, playback, recording TV channel...) are displayed
on the TV screen.You can switch off the OSD information
to avoid recording it when recording from the
DVD recorder system to additional equipment.
On:The OSD information appears in every selected
mode for a few seconds and disappears again.
Off:The OSD information is switched off and is no
longer displayed on the TV screen.
Standby
You can switch off the clock display on the DVD recorder
system to save power. Programmed recordings will
nevertheless be executed.
Low power: If the DVD recorder system is switched to
standby by pressing 2, the clock display is
switched off.
Normal: If the DVD recorder system is switched to
standby by pressing 2, the clock display is still
visible.
Demo mode: A list with the most important features
scrolls on the display when the DVD
recorder system is switched to standby.
Display
Select a level for the display brightness.
Note: You cannot switch off the display completely.
7
Press OK to confirm the new setting.
Press 1 to end.
8
48
C
D
E
F G
17
off
off
no
Features
On
Normal
Bright
x Remote control settings
You can set the remote control type to which your
DVD recorder system should respond to: DVD player,
DVD recorder.
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
Press 1 as often as necessary to select A.
3
Press 4 or 3 as often as necessary to select x Remote
4
control settings. Next, press 2 to confirm.
off
A
t
u
w
x
Press 4, 3 as often as necessary to select the remote
5
control type to which your DVD recorder system should
respond to:
DVD player:The DVD recorder system responds
DVD recorder:The DVD recorder system responds
6
Press OK to confirm the new setting.
Press 1 to end.
7
B
C
D
E
2
17
off
off
Remote control settings
Remote control used
DVD player
additionally to a DVD player remote
control (remote control code RC-6).
Choose this setting if the remote control
of your Philips TV set supports DVD
functions.
only to the supplied remote control.
F G
no
off
Advertisement
Table of Contents
