Table of Contents
Advertisement
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press
SOUND SETTINGS.
2
Select SURROUND, and then press OK.
3
Press the Navigation buttons (up/down)
to select a setting on the display:
AUTO: Surround sound based on the
•
audio stream.
MULTI-CH: Immersive multi-channel
•
sound for an enhanced movie
experience.
STEREO: Two-channel stereo sound.
•
Ideal for listening to music.
4
Press OK to confirm.
Equalizer
Change the high frequency (treble), mid
frequency (mid), and low frequency (bass)
settings of the home theater.
1
SOUND SETTINGS.
Press
2
Select TREBLE, MID or BASS, and then
press OK.
3
Press the Navigation buttons (up/down)
to change the frequency.
4
Press OK to confirm.
22
EN
5 Change settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
exit the menu, press
Language settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Menu language]: Select a display
•
language for menu.
•
[Audio]: Select an audio language for
discs.
•
[Subtitle]: Select a subtitle language
for discs.
[Disc Menu]: Select a menu language
•
for discs.
Note
•
If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
'Language code' on page 33).
•
If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
BACK. To
(Home).
Advertisement
Table of Contents
