Additional Tv Channel Settings; Tv Channel Name; Tv System; Nicam - Philips LX9000R/25S User Manual

System settings

Additional TV channel settings

REC/OTR
DVD/MON
CAM 1/2
1
4
7
DISC
SYSTEM
VOL
- TV VOL
∞
1
Press CH + or CH – or 0–9 repeatedly to select a
TV channel on the DVD recorder system.
2
Press SYSTEM MENU.
Press 1 repeatedly to select A.
3
Press 4 repeatedly to select y Installation, then press 2.
4
Press 4 repeatedly to select Manual search, then press 2.
5
Press 4 repeatedly to select either
6
TV channel name: to set the TV channel name,
Decoder: see "Using a connected decoder to decode a
TV channel",
TV system: to change the TV system of the TV channel,
NICAM: to switch NICAM on/off,
Fine tuning: to change the tuning of the TV channel
slightly.
22
2
TV TUNER SAT
CD CDR/TAPE VCR/GAME
2 3
5 6
8 9
MENU
SELECT
0
AUDIO
OK
É É
H
CH
MUTE
+
§
9
2 ;

TV channel name

Press 2 repeatedly to select a character of the TV channel
1
name.
Press 3 or 4 repeatedly to set/change the desired
2
character.
3
Repeat steps 1 and 2 for all characters of the channel
name.
Note: Channel names are limited to 5 characters.
4
Press OK to store the TV channel name.
5
Press SYSTEM MENU to exit.

TV system

If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
Press 2 repeatedly to select the TV system (PAL-BG,
1
PAL-I, PAL-DK, SECAM, SEC-BG, SEC-DK) which
produces the clearest sound and picture on your TV.
Note: If you change TV system to a setting not supported by
your TV set, the picture and/or sound may be missing.
2
Press OK to store the setting.
3
Press SYSTEM MENU to exit.

NICAM

Press 2 repeatedly to switch NICAM on or off:
1
On: Stereo and 2-channel sound is supported.
Off:To improve the sound quality of a weak TV channel,
only mono sound is supported.
2
Press OK to store the setting.
3
Press SYSTEM MENU to exit.

Fine tuning

If the reception of the TV channel is distorted, press 3 or 4
1
repeatedly to change the tuning of the TV channel slightly.
2
Press OK to store the setting.
3
Press SYSTEM MENU to exit.