Table of Contents
Advertisement
7 Record
Note
•
To record, use only "Normal" (IEC type I) tapes
on which the write-protect notches (tabs) are not
broken.
Tip
•
When you play or record a tape, the sound source
cannot be changed.
•
The best recording level is set automatically.
Change of volume and sound effect does not affect
recording.
Note
•
The quality of recorded sound can differ depending
on the source and the tape used.
Auto record from CD to
tape
1
Press DISC to select disc source.
2
Load a disc.
3
Pull the handle beside PULL TO OPEN
on the front panel to open the tape
button cover.
4
Press
to open the tape door.
5
Load a tape.
6
Press to start recording.
»
Disc play starts automatically from the
beginning of the disc.
•
To pause/resume recording, press
•
To stop recording, press
Record a section of a disc to
tape
1
During disc play, press and hold
search, then release the button.
•
2
Press
3
Press to start recording.
»
•
•
Record from radio to tape
1
Tune to the desired radio station .
2
Pull the handle beside PULL TO OPEN
on the front panel to open the tape
button cover.
3
Press
4
Load a tape.
5
Press to start recording.
•
•
.
.
To select a track, press
to pause disc play.
Disc play resumes automatically.
To pause recording, press
resume, press this button again.
To stop recording, press
to open the tape door.
To pause recording, press
resume, press this button again.
To stop recording, press
/
to
/ .
. To
.
. To
.
EN
21
Advertisement
Table of Contents
