Switch
Figure 59. Example of two storage subsystems in a dual SAN environment
Figure 60 shows an example of a two-cluster configuration.
Switch
Figure 60. Example of a two-cluster configuration
Installing the storage subsystem configuration
Using the information gathered in the previous sections, install the host systems
and host adapters.
Notes:
1. See the documentation provided with your host adapters for installation
2. Use the correct host adapter driver. For the latest supported host adapters and
Host system
with two host
adapters
DS4200
Cluster 1
Host system
Host system
with two host
with two host
adapters
Switch
requirements and procedures.
drivers, go to the following Web site:
www.ibm.com/servers/storage/support/disk/
Host system
with two host
adapters
Switch
Host system
with two host
adapters
adapters
Switch
DS4200
Chapter 3. Cabling the storage subsystem
DS4200
Cluster 2
Host system
with two host
adapters
Switch
77