Table of Contents
Advertisement
2. Connect the fibre channel cables from the SFP modules in the DS4200 Express
RAID controller host ports to either the SFP modules in the fibre channel switch
or the SFP modules of the host bus adapters. Figure 54 shows the location on
the RAID controllers on the DS4200 Express Storage Subsystem where the
host-system cables connect.
1
Figure 54. Location of host cables on RAID controllers on the DS4200 Express
Table 18. DS4200 Express Storage Subsystem location of host ports on controllers
Number
1
2
3
3. Repeat steps 1 on page 72 and 2 for each additional redundant host
connection. You can create a maximum of two redundant host connections for
the DS4200 Express Storage Subsystem, as shown in Figure 55 on page 74.
Note: Figure 55 on page 74 shows a connection to a fibre channel host bus
adapter in the DS4200 Express Storage Subsystem. You can also
connect to fibre channel switch ports (not shown).
3
3
Description
Controller A
Controller B
Host Ports
Chapter 3. Cabling the storage subsystem
2
73
Advertisement
Table of Contents
