Bridge Mode - ZyXEL Communications XMG3512-B10A User Manual

Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
IPv6 DNS Server
This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field. Configure the
IPv6 DNS server in the following section.
Obtain IPv6 DNS
Info
Automatically
Use Following
Static IPv6 DNS
Address
Primary DNS
Server
Secondary DNS
Server
Apply
Cancel

6.2.1.2 Bridge Mode

Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the
connection you want to configure. Select Bridge as the encapsulation mode. The screen varies
depending on the interface type you select.
If you select ADSL/VDSL over PTM or Ethernet as the interface type, the following screen appears.
Figure 25 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL/VDSL over PTM -Bridge
Mode)
Chapter 6 Broadband
DESCRIPTION
Select Obtain IPv6 DNS Info Automatically to have the XMG get the IPv6 DNS server addresses
from the ISP automatically.
Select Use Following Static IPv6 DNS Address to have the XMG use the IPv6 DNS server addresses
you configure manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click Apply to save your changes back to the XMG.
Click Cancel to exit this screen without saving.
XMG3512-B10A User's Guide
71