Cut Spindle According To Door Thickness; Alignment Post Location - Cal-Royal CRCODE-202 Instruction And Programming Manual

Cut spindle according to door thickness

1. Spindle supplied with breakable
requirements.
2. Break off one or two points from
the spindle, according to the door
thickness measurement.

Alignment post location

1. As tubular latchbolts only have one bolt hole, fasten the alignment post to the desired
position, on the back plate of the Outside Lock .
A
B
Post positions provided for:
A Left hand, 2
B Left hand, 2
C Right hand, 2
D Right hand, 2
C
D
3 / " backset
4
3
/ " backset
8
3 / " backset
4
3
/ " backset
8
6
6605 Flotilla St., Commerce, CA 90040
Tel (323) 888-6601 Fax (323) 888-6699
www.cal-royal.com