48-Port Ex4300 Switches; Figure 4: Rear Panel Of A 32-Port Ex4300 Switch; Table 4: Components In 32-Port Ex4300 Switches - Juniper EX4300 Hardware Manual

Table 4: Components in 32-Port EX4300 Switches

Switch Models Built-In Ports
EX4300-32F 32 SFP ports,
four SFP+
ports, and two
QSFP+ ports
EX4300-32F-S 32 SFP ports,
four SFP+
ports, and two
QSFP+ ports
EX4300-32F-DC 32 SFP ports,
four SFP+
ports, and two
QSFP+ ports
Copyright © 2017, Juniper Networks, Inc.

Figure 4: Rear Panel of a 32-Port EX4300 Switch

Table 4 on page 7 lists the 32-port EX4300 switch models and their components.
Number of
PoE-enabled
Ports Fan Modules
0 Two fan modules;
each with an
OUT (AFO)
0 Fan modules for this
model are not
shipped by default;
you must separately
order either two
OUT (AFO)
or two
labeled fan modules.
0 Two fan modules;
each with an
OUT (AFO)
You can use the built-in QSFP+ ports as network ports or as VCPs to connect the switch
in a Virtual Chassis or a VCF. By default, the built-in QSFP+ ports are configured as VCPs.
You can also use the uplink module ports to connect members of a Virtual Chassis or a
VCF across multiple wiring closets by configuring these ports as VCPs. For more
information about Virtual Chassis, see EX Series Virtual Chassis Overview. For more
information about VCFs, see Virtual Chassis Fabric Overview.

48-Port EX4300 Switches

The 48-port EX4300 switches—EX4300-48T and EX4300-48P—provide 48 built-in
10/100/1000BASE-T Ethernet network ports, with or without PoE+ depending on the
switch model, and four built-in quad small form-factor pluggable plus (QSFP+) ports
that can house 40-Gigabit QSFP+ transceivers. All network ports in the EX4300-48P
switch are equipped for Power over Ethernet (PoE+), whereas EX4300-48T has no PoE+
ports. These switches support AC or DC power supply with different airflow directions.
Each switch provides a slot for installing an optional 4-port 10-Gigabit Ethernet SFP+
Power Supply
Shipped by Default
A 350 W AC power
supply with the
AIR
label. label.
OUT (AFO)
Power supplies for
this model are not
shipped by default;
you must separately
AIR order either AC
labeled power supplies or DC
power supplies.
AIR IN (AFI)
A 550 W DC power
AIR supply with the
label. OUT (AFO) label.
Chapter 1: System Overview
Supported Uplink
Modules
2-port 40-Gigabit
Ethernet QSFP+ uplink
AIR
module and 8-port
10-Gigabit Ethernet
SFP+ uplink module
2-port 40-Gigabit
Ethernet QSFP+ uplink
module and 8-port
10-Gigabit Ethernet
SFP+ uplink module
2-port 40-Gigabit
AIR Ethernet QSFP+ uplink
module and 8-port
10-Gigabit Ethernet
SFP+ uplink module
7