Twin Needle Sewing - Bernette b38 Instruction Manual

Stitch Patterns for Twin Needle Sewing
01 02
MODE 1, 2
14 17 18 19 20
01 02 03 05 17 21 23 24 25 26
28 31 32 33 37
Mode 3
47 48 51 52
59 60 70 73 75 76 79 83 84 89
54
03 04 05 06 12 13
42 43 45
54 56 57 58

Twin Needle Sewing

Stitch pattern:
Thread tension:
Presser foot:
PLEASE NOTE:
When you sew patterns with the twin needle, test the
stitches before you begin to sew.
Use Zigzag foot or Satin stitch foot for twin needle sew-
ing.
Turn off the machine before changing the needle.
Replace the twin needle with a single needle when twin
needle sewing is finished.
• Starting to sew
Use the second spool pin for twin needle sewing.
Place two spools of thread as shown.
Draw both threads from the spools and thread them through the
points from to .
Make sure that the two strands of thread do not get tangled.
Turn the power switch on and select the desired pattern.
Press the twin needle button
back or left under the presser foot.
PLEASE NOTE:
When changing the sewing direction, raise the needle
and turn the fabric.
When you select stitch patterns not for twin needle sew-
ing and press the twin needle button, the twin needle
mark will blink on the LCD display and the caution buzzer
sound.
Stitch patterns cannot be memorized in the twin needle
mode.
Use the thread cutter on the head cover when trimming
threads.
Use thin threads #60 or larger number for the twin needle
sewing.
Mode 3 : 54 (Example)
3 - 6
Satin stitch foot
Open toe foot: F2
, draw the both threads to the