Bernette b38 Instruction Manual page 42

42
Start the machine to sew the buttonhole. The buttonhole
will be automatically sewn. The machine will sew the left
row first.
The machine will sew the back bartack and the right row.
The machine will sew the front bartack, then it stops auto-
matically. The machine will trim the threads at the end of
sewing if the thread cutter sign is indicated on the LCD
display.
PLEASE NOTE:
If you start sewing the buttonhole without lowering the
buttonhole lever, the LCD display will show "bL" message
and the buttonhole lever sign
tonhole lever, then restart the machine.
Remove the fabric and place a pin
bartack at each end to prevent accidentally cutting
stitches. Cut the opening with the seam ripper
Pin
Seam ripper
When buttonhole sewing is finished, push the buttonhole
lever upward as far as it will go.
Buttonhole lever
will blink. Lower the but-
just below the
.