Bernette b38 Instruction Manual page 22

22
• Needle threader
CAUTION:
Turn OFF the power switch when using the needle
threader.
Lower the presser foot. Raise the needle to its highest posi-
tion. Pull down the needle threader
The hook comes out through the needle eye from behind.
Knob
Draw the thread from guide (a)
the hook . Draw the thread up along the right side of
guide (b) and slip the thread in between guide (b) and
the holder plate .
Hook
Guide (a)
Guide (b)
Holder plate
Raise knob threader in the direction of the arrow, drawing
the thread loop through the needle.
Pull the thread through the needle eye.
PLEASE NOTE:
The needle threader can be used with a #11 to #16 nee-
dle or a blue shank needle. Thread sizes 50 to 90 are
recommended.
The threader can't be used for a twin needle.
as far as it will go.
to guide (b) and under