Biostar I94GC-I7 Setup Manual page 45

IRQ Resources
This submenu will allow you to assign each system interrupt a type,
depending on the type of device using the interrupt. When you press the
"Press Enter" tag, you will be directed to a submenu that will allow you to
configure the system interrupts. This is only configurable when
"Resources Controlled By" is set to "Manual".
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI / VGA Palette Snoop
Some old graphic controllers need to "snoop" on the VGA palette and
then map it to their display as a way to provide boot information and
VGA compatibility. This item allows such snooping to take place.
The Choices: Disabled (Default) / Enabled
Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (default.) / 128 / 256 / 512 / 1024 / 2048
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
I94GC-I7
45