Table of Contents
Advertisement
Mini-ITX Mainboard Manual
SuperIO Device
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second
serial ports.
The Choices: 3F8/IRQ4 (Default) / Disabled / 2F8/IRQ3 / 3E8/IRQ4 /
2E8/IRQ3 / Auto
PWRON After PWR-Fail
This setting specifies whether your system will reboot after a power
fail or interrupts occurs.
Off (Default)
On
Former-Sts
The Choices: Off (default) / On / Former-Sts.
CIR Port Address
This option allows you to set the CIR port address.
The Choices: Disabled (Default) / 220 / 228
CIR Port IRQ
This option allows you to set the CIR port IRQ.
The Choices: 11 (Default) / 5
38
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power
failure or interrupt occurs.
Advertisement
Table of Contents
