Mini-ITX Mainboard Manual
Clear CMOS Header *
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the mainboard.
※ Clear CMOS Procedures:
1.
Remove AC power line.
2.
Set the jumper to "Pin 2-3 close".
3.
Wait for five seconds.
4.
Set the jumper to "Pin 1-2 close".
5.
Power on the AC.
6.
Reset your desired password or clear the CMOS data.
*How to Setup Jumpers
The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is "close", if not, that means the jumper is "open".
Pin opened
18
1
3
Pin closed
1
3
Pin 1-2 Close:
Normal Operation(default).
1
3
Pin 2-3 Close:
Clear CMOS data.
Pin1-2 closed