Biostar I94GC-I7 Setup Manual page 29

Table of Contents

Advertisement

Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat
the keystroke.
The Choices: 250 (Default) / 500 / 750 / 1000
(This option can be set only when "Typematic Rate Setting" is enabled.)
Security Option
This option will enable only individuals with passwords to bring the
system online and/or to use the CMOS Setup Utility.
The Coices:
System
A password is required for the system to boot and is
also required to access the Setup Utility.
Setup (default)
A password is required to access the Setup Utility
only.
This will only apply if passwords are set from the Setup main menu.
APIC Mode
Selecting Enabled enables APIC device mode reporting from the BIOS
to the operating system.
The Choices: Enabled (Default) / Disabled
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor
specification.
Select version supported by the operation system running on this
computer.
The Choices: 1.4 (Default) / 1.1
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with
memory exceeding 64MB.
The Choices: Non-OS2 (Default) / OS2
Small Logo(EPA) Show
This item allows you to select whether the "Small Logo" shows. Enabled
(default) "Small Logo" shows when system boots up. Disabled No "Small
Logo" shows when system boots
The Choices: Enabled (Default) / Disabled
Summary Screen Show
This item allows you to enable/disable the summary screen. Summary
screen means system configuration and PCI device listing.
The Choices: Disabled (Default) / Enabled
I94GC-I7
29

Advertisement

Table of Contents
loading

Table of Contents