Biostar I94GC-I7 Setup Manual page 41

Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Disabled (Default) / Enabled
Resume by Alarm
When "Enabled", you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices: Disabled (Default) / Enabled
Date (of Month) Alarm
You can choose which date the system will boot up.
Date (of Month) Alarm
You can choose the system boot up time, input hour, minute and
second to specify.
Reload Timer Events
Primary/Secondary IDE 0/1
You can select to enable or disable Primary or Secondary RAID 0 or
RAID 1 function under this item.
The Choices: Disabled (Default) / Enabled
FDD, COM, LPT Port
You can select to enable or disable FDD, COM, and LPT port under
this item.
The Choices: Disabled (Default) / Enabled
I94GC-I7
41