Biostar I94GC-I7 Setup Manual page 31

Table of Contents

Advertisement

DRAM RAS# Precharge
If an insufficient number of cycles is allowed for RAS to accumulate its
charge before DRAM refresh, the refresh may be incomplete, and the
DRAM may fail to retain data. Fast gives faster performance; and Slow
gives more stable performance. This field applies only when
synchronous DRAM is installed in the system.
The Choices: 5 (Default) / 2 / 3 / 4 / 6 / Auto
Precharge Delay (TRAS)
This item controls the number of DRAM clocks to activate the precharge
delay.
The Choices: Auto (Default) / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 /
15
System Memory Frequency
This item allows you to select the Memory Frequency.
The Choices: Auto (Default) / 400MHz / 533MHz / 667MHz
VGA Setting
PEG/Onchip VGA Control
This item allows you to enabled or disabled PEG/On-chip VGA
controller.
The Choices: Auto (Default) / Onchip VGA / PEG Port
On-Chip Frame Buffer Size
This item will be different as your memory modules. When the memory
size is decided, this frame buffer size will also be fixed.
The Choices: 8MB (Default) / 1MB
DVMT Mode
The Choices: DVMT (Default) / FIXED / BOTH
DVMT/FIXED Memory Size
DVMT stands for "Dynamic Video Memory Technology". This is an
enhancemnet of the unified memory architecture (UMA) concept. Where
the optimum amount of memory is allocated for balanced graphics and
system performance. DVMT dynamically reponds to system
requirements and applications demands, by allocating the proper
amount of display, texturing and buffer memory after the operating
system has booted.
The Choices:128MB (Default) / 64MB / 224MB
I94GC-I7
31

Advertisement

Table of Contents
loading

Table of Contents