Monessen Hearth AVFL60NIP Installation Manual page 28

In extreme cases, lab tests have shown yellow pigments
fading out of paints over time due to heat. Vent run and
installation location will have an effect on wall temperature
and fading. If fading occurs, consider avoiding paint that
contains yellow pigment.
In regards to the sheetrock mud, apply a smooth, even
layer, covering a wide area of the wall for the best results.
For best results, follow the tips below.
To Reduce the Risk of Sheetrock Cracking:
Use all purpose joint compound.
Use eggshell paint
(100% acrylic latex paint, gloss or semi-gloss).
To Avoid Sheetrock Cracking:
Use a quick set or light weight joint compound.
Use flat paint.
6"
Install
Option #1
Install
Option #2
Figure 8.1 - Finishing Around Unit
28
DO
DO NOT
Install
Option #1
NON-COMBUSTABLE
NON-COMBUSTABLE
Monessen • AVFL60 Installation Manual • 4605-901 Rev. A • 05/17
WARNING! Risk of Fire! DO NOT apply combustible
materials beyond the minimum clearances. Comply with
all minimum clearances to combustibles as specified in
this manual. Overlapping materials could ignite and will
interfere with proper operation of doors and louvers.
WARNING! Risk of Fire! DO NOT install drywall or
other combustible materials directly onto the installed
non-combustible board. Overlapping materials could
ignite.
Install
Option #2
Install Install
Option #2 Option #1
Install
Option #1
(page 27)
Install
Option #2
(page 27)
Finish with non-combustible
up to unit opening. Cannot
cover the opening so that
screen can be removed.