Related Manuals for LaserLine QUAD 1000
Summary of Contents for LaserLine QUAD 1000
- Page 1 QUAD 1000 OWNERS MANUAL – OPERATION GUIDE Built in Redmond Oregon USA www.laserlinemfg.com...
- Page 2 COMPONENTS 4001-0000 Quad 1000 5 arc second zenith laser featuring electronic servo self-leveling with variable temperature compensation for the most accurate and consistent readings. Features downward shooting laser plumb-bob for getting over your point, upward zenith laser to 1,200 feet (366m), one button operation with LCD display and up to 140 hrs.
- Page 3 (Underside) WHAT HAPPENS WHEN YOU POWER-UP? The Quad 1000 is activated and controlled by a single button. When you push the power button, the unit begins to self- level. Leveling status and battery power are displayed on the LCD screen. The downward shooting smaller beam (plumb-bob) is activated and will be blinking.
- Page 4 A) Attach the Quad 1000 to the trivet using the spring loaded 5/8 x 11 mounting bolt. B) Place the trivet over your reference point on the ground floor.
-
Page 5: Reference Point
B) Set the Quad 1000 on the deck and adjust the unit so that two pencil lines are in line with the two centering notches on the sides of the Quad base, and one line is centered on the notch on the front of the Quad. -
Page 6: Maintenance
Given the dynamics and movement of structures due to temperature, wind, loads etc., the target relation to the Quad 1000 laser may be moving and not providing a constant. This should definitely be taken into consideration so as a result, depending on conditions, you could be getting readings of ... - Page 7 Aperture: Danger Logo Identification – Serial Protective Housing: Type: IEC Compliance: QUAD 1000 SPECIFICATIONS Laser Laser Wavelength: 635nm Laser Power: 4.5mw up / 1.0mw down Laser U.S.A. CDRH Class IIIa International IEC 60825-1 2014 Class 3R ...
-
Page 8: Warranty
LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any product returned to an authorized service center for that purpose.