Download Print this page

Programme Settings - Siemens WT7UH640GB Installation And Operating Instructions Manual

Hide thumbs

Advertisement

0

Programme settings

P r o g r a m m e s e t t i n g s
Buttons
Note:
Not all buttons and their functions can be activated in every programme. The activated settings are
illuminated particularly brightly to highlight them on the display. You can change or deactivate the activated
settings by repeatedly pressing on the relevant buttons on the display.
}
(Remote Start)
Drying result :
Ò
(Cupboard-dry plus)
»
(Cupboard-dry)
æ
(Iron Dry)
Indicators/
Explanations and notifications
symbols
Pressing } (Remote Start) allows you to start the appliance
remotely via the Home Connect app or to call up the
Home Connect settings.
Enabling the appliance to be started remotely via the
Home Connect app:
Note:
is closed and the appliance is connected to your home network.
Briefly press }.
Note:
in the following circumstances:
You open the door.
There is a power failure.
Once the programme has ended.
If you press I (Start/Pause) on the appliance.
If you briefly press } again.
If you press # to switch off the appliance.
Calling up Home Connect settings:
Press and hold } for at least 3 seconds.
Select the dryness level that you require for the laundry you
need to dry.
Multi-layered, thick laundry that does not dry readily.
Ò
Normal, single-layered laundry.
»
Normal, single-layered laundry that still needs to be damp after
S
drying and is suitable for ironing or hanging up.
Remote start can only be activated if the appliance door
Remote start will be deactivated for safety reasons
Programme settings
en
25

Advertisement

loading

  Related Manuals for Siemens WT7UH640GB