Table of Contents
Advertisement
Symbol
Description
Programme status:
Drying
Ù
Dryness level: Iron Dry
S
■
■
Dryness level: Cupboard
»
■
■
Dry
Dryness level: Cupboard
Ò
■
■
Dry Plus
Anti-Crease
Ý
- ˜ -
Pause
Programme end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. f 02:45
Programme delay
Empty the condensation con-
ð
tainer ~ Page 31
Fluff filter
ñ
Automatic heat exchanger
Û
rinse
Rinsing progress indicator
ø
Wi-Fi
|
Energy manager
±
Basic appliance care pro-
''§"
gramme
Information
Lit: status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in"
time
Empty the condensation container and then rein-
■
sert it.~ Page 31
Then press I (Start/Pause).
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure
■
that the drain hose:
– Is correctly connected. ~ Page 46
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any
debris.
Remove the fluff ~ Page 32
The heat exchanger is cleaned automatically. Do not
pull out the condensation container while this is dis-
played.
Off: Wi-Fi is switched off and your appliance is not
■
connected to your home network.
Flashing: The appliance is trying to connect to your
■
home network.
Lit: Wi-Fi is switched on and your appliance is con-
■
nected to your home network.
Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)
Not a fault. After a certain period, the appliance will
automatically recommend that you run the basic appli-
ance care programme. Run the basic appliance care
programme. ~ Page 55
Display
en
21
Advertisement
Table of Contents
