Cleaning The Base Unit - Siemens WT7UH640GB Installation And Operating Instructions Manual

Table of Contents

Advertisement

Push the filter in until you feel it lock
5.
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
Push the condensation container in
6.
until you feel it lock into place.

Cleaning the base unit

You can clean the appliance's base unit
if it has fluff in it, for example.
Allow the appliance to cool down
Note:
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
To open the maintenance flap, take
1.
hold of it at the top at both sides and
pull it down.
Cleaning and maintenance
Clean the maintenance flap with a
2.
soft, damp cloth.
Unlock the levers on the heat
3.
exchanger cover.
Pull the heat exchanger cover out by
4.
its grip.
Use a soft brush to clean the heat
5.
exchanger cover.
Make sure that no dirt or
Note:
debris is left on the seal.
en
51

Advertisement

Table of Contents
loading

Table of Contents