Draining The Condensation Water - Siemens WT7UH640GB Installation And Operating Instructions Manual

Table of Contents

Advertisement

Draining the condensation water

en
Œ
Draining the
condensation water
Condensation will form in the appliance
D r a i n i n g t h e c o n d e n s a t i o n w a t e r
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
Remove any accessories from the
1.
drum.
Remove all items from the bag.
2.
46
Detach the condensation hose from
3.
the socket.
The appliance comes
Note:
delivered with the condensation
hose already fitted to the socket.
Place the condensation hose in the
4.
"parked" position.
Take the drain hose from the
5.
accessories and attach it to the free
socket, pushing it up to the stop.

Advertisement

Table of Contents
loading

Table of Contents