Table of Contents
Advertisement
Home Connect
en
Press }.
4.
The FlexStart function has now been
activated and the appliance will wait to
be started by the smart energy system
(Energy manager).
If the time changes on the display to
f „.‹œ, for example, the smart energy
system (Energy manager) has
established a time at which your
appliance can start. The programme will
end after the specified time.
Notes
If the smart energy system (Energy
■
manager) does not start your
appliance, the programme will still
be started before the set time period
ends.
The programme will end when the
time period ends.
For safety reasons, } and in turn the
■
FlexStart function will be
deactivated in the following
circumstances:
– Press I.
– Open the door.
– Programme end.
– Press # to switch off the
appliance.
– Power failure.
If the FlexStart function is
deactivated, the B (Ready in) will
remain active.
Adding more laundry or removing
laundry:
If the FlexStart function has
Note:
already been activated but the
programme has not yet started, you will
still be able to load more laundry or
remove some from the drum.
Press I (Start/Pause).
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press I (Start/Pause).
5.
42
Press }.
6.
The FlexStart function has now been
activated and the appliance will wait to
be started by the smart energy system
(Energy manager).
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of your household appliance.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Ensure that the Home Connect
Note:
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Advertisement
Table of Contents
