Table of Contents
Advertisement
Home Connect
en
Connecting to your home
network manually
If your appliance has already been
automatically connected to your home
network, you can skip the manual
connection step.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
Switch on the appliance.
1.
Press and hold } for at least
2.
3 seconds.
'ž£ (connect automatically) will
appear on the display.
Set the programme to position 2.
3.
à'˜ (connect manually) will appear
on the display.
Press I (Start/Pause) to connect to
4.
the network. | will flash on the
display.
The appliance will now set up its own
Wi-Fi network with the name (SSID)
Home Connect. You can access this
using your smartphone or tablet PC.
Call up the Wi-Fi settings on your
5.
smartphone or tablet PC.
Connect your smartphone or
6.
tablet PC to the Home Connect Wi-
Fi network and enter the password
(key) "HomeConnect".
The connection process may
Note:
take up to 60 seconds.
Once you have connected
7.
successfully, open the
Home Connect app on your
smartphone or tablet PC.
38
In the Home Connect app, enter the
8.
name (SSID) and password (key) for
your home network and then select
Transfer to appliance.
If the appliance has connected to your
home network successfully, ™©Ÿ
(connected) will appear on the display
and | will be lit continuously.
Press } briefly to exit the Home
9.
Connect settings.
Notes
If a connection could not be
■
established, "§§ (fault) will appear
on the display. Check whether your
appliance is in range of your home
network. Try connecting manually
again.
If your smartphone or tablet PC is
■
still connected to the Home Connect
network, you will need to connect it
to your home network first.
Connecting to the Home
Connect app
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
Switch on the appliance.
1.
Press and hold } for at least
2.
3 seconds.
'ž£ (connect automatically) will
appear on the display.
Set the programme to position 3.
3.
'˜˜ (connect to app) will appear on
the display.
Press I (Start/Pause).
4.
The appliance will now connect to your
Home Connect app.
Advertisement
Table of Contents
