Datavideo TVS-1000 Instruction Manual page 72

What is the recommended monitor
9.
resolution?
10. Do video outputs from the graphic card
DVI-D port and the virtu card HDMI port
exhibit the same quality?
11. Sometimes one-second mosaic is seen on
the PGM view.
12. Why does the TVS system exit to
Windows desktop right after monitor
cable is unplugged while TVS system is
running?
13. Why the Windows Media Player cannot
play the MPEG file captured using the
TVS system?
14. Why, after renaming the captured file in
the TVS system, the file name on the
Windows OS remains unchanged?
15. After "Follow" is enabled for Line IN on
the TVS audio mixer, the Line IN audio is
found to output with CAM1 or Cam2.
16. Why does the screen viewable area
become smaller right after bootup of the
TVS machine?
17. Why the file cannot be found or the file
is blank after the virtualset maker file
(.dvsx) is renamed under the Windows
OS and imported into the TVS Production
Module?
18. Why can't I hear audio from my HDMI
camera in TVS-1000?
19. Why are there warning signs on my
multi-viewer?
The recommended monitor resolution is
1920x1080 and above or else the user
interface, production live screen, might
become distorted.
Video output (PGM OUT) from the DVI-D
port exhibits poorer quality.
This will only occur once upon switching
PVW view to PGM view for the first time.
TVS system has to work with monitors
connected, please do not unplug monitor
while the TVS system is still running.
Please use VLC Player, which is a freeware.
Windows Media Player cannot play MPEG II
files.
The TVS system only allows local renaming
of the captured files during any TVS session,
and does not rename the actual file name
on the PC system. This is because a single
file can be referenced by many other
projects or sessions so if the actual file name
on the PC system is renamed, the reference
to other projects/sessions will be lost.
The Line in will follow Cam1 or Cam2 after
the "Follow" check box is checked. If you do
not want the Line in Audio, please select
Mute for Line in.
This may happen in some monitors. Please
activate overscan mode of the monitor.
While renaming the VirtualSet Maker files
(.dvsx), please also rename the
corresponding .PNG files in the same folder.
Please select HDMI instead of Line IN on the
TVS Audio Mixer.
Please make sure all the resolutions and
frame rate are same as your session
resolution and frame rate which you
assigned on the startup menu before
production.
72