Chapter 2 Tvs-1000 Trackless Virtual Studio Setup; System Requirement; Connections; Front Panel - Datavideo TVS-1000 Instruction Manual

Chapter 2
2.1

System Requirement

 Monitor x 1 (up to three monitors connected to choices of the HDMI x 1, DVI x 1,
DisplayPort x 3)
 Keyboard
HDMI camera x 1 or SDI camera with a converter x 1

2.2

Connections

2.2.1 Front Panel

The front panel contains the RS-232 connection for operation with an external Datavideo RMC-
220 control panel. Access to the front panel is protected with a keyed door. This provides
protection against the system being accidentally switched off or reset or the data disk being
removed.
It is recommended that the workstation should be positioned so as to ensure air flows reaching
the front and the back panels. Fans providing appropriate system cooling are located behind the
panels. The workstation case is designed to be mounted on a server rack and occupies a 4U
space.

2.2.2 Back Panel

Power Supply Socket
Depending on the shipment
destination and the user
location, a power supply cord
with a suitable plug will be
supplied
PS/2 Keyboard / Mouse combo port
USB 2.0 ports
Connection of an external standard USB keyboard and mouse
USB 3.0 Ports (Blue)
Connection of USB Wireless Dongle / Adapter IF ANY
Please note that if you do not find the USB wireless dongle in the box,
the TVS-1200 System Unit that you receive may already have a built-in
wireless network card.
TVS-1000 Trackless Virtual Studio Setup
Power On/Off Switch
Switches power On/Off
0 – OFF
1 – ON
7