Tvs-1000 Aux Card; Introduction; Installation - Datavideo TVS-1000 Instruction Manual

2.5

TVS-1000 AUX Card

2.5.1 Introduction

TVS Virtu AUX Card is designed primarily for powerpoint file input via HDMI port as well as for
other applications such as media player or camera input. TVS AUX card can also be used in TVS-
1200.
TVS-1000 Virtu HDMI Card and Virtu AUX Card Mapping Table
Card Type
Virtu HDMI
Table 1: TVS-1000 Virtu HDMI Card and Virtu AUX Card Mapping Table
Above table points out Virtu HDMI card H/W ver 1.0 & 1.2 cannot be workable with Virtu AUX
card. Only Virtu HDMI card H/W version above 1.3 can work with Virtu AUX card.

2.5.2 Installation

There are two models of motherboard used for TVS-1000 PC System: ASUS H87-PRO (white PCIe
slot) and ASUS H97-PRO (black PCIe slot)
ASUS H87-PRO Motherboard
1. Remove Wi-Fi card
2. Insert AUX card in the Wi-Fi card slot
3. For TVS-VIRTU HDMI Card Version 1.4, use the cable
shown to the right to connect between TVS Virtu AUX
card and TVS Virtu HDMI card
ASUS H97-PRO Motherboard
1. Remove Wi-Fi card and insert it in the slot located between HDMI card and video card
2. Insert AUX card in the Wi-Fi card slot (PCIe)
3. For TVS-VIRTU HDMI Card Version 1.4, use the cable
shown to the right to connect between TVS Virtu AUX
card and TVS Virtu HDMI card
H/W Workable w/
Version AUX Card
1.0 X
1.2 X
1.3 ∆
1.4 O
The cable connection between TVS Virtu AUX card and
TVS Virtu HDMI card is depicted in the diagram below.
The location of the slot for the cable connection is
circled in red as shown in the diagram on the left. Both
cards should have the identical slot at the same
location.
11
Remark
HDMI Ver 1.0 H/W limited.
HDMI Ver 1.2 H/W limited.
Functional but with warning
messages