Additional Monitor Support - Datavideo TVS-1000 Instruction Manual

5.6

Additional Monitor Support

TVS-1000 operates on multiple input and output signals. To ensure better functionality for the
preview of the signals, the user may connect additional monitors to the workstation. With a
separate monitor, the preview can be larger than the one in Production Live.
Another monitor can be used for Multiview, which is a clear interface presenting the previews
available in Production Live.
The following previews are available in Multiview:
• PREVIEW – presentation of the element chosen to be broadcasted next;
• PROGRAMME – presentation of the current signal (system output);
• Previews of virtual sets loaded into memory;
• Preview of all media loaded into virtual players;
• Camera preview (one or two, depending on system configuration).
A third monitor may, with suitable configuration, show a full-screen PREVIEW or PROGRAM view.
The third monitor can also be used for the mirror output of the talent.
Hence, in order to allow the user to manage multiple monitors, a Monitor Configuration
Interface as shown in the diagram below is built into the TVS-1000. To open the interface, simply
click "Configuration" on the tool bar, select "Configuration" option and then click "Screens" tab.
The user is thus able to shuffle monitor assignments by making selection of the desired display in
the pull-down menu. In the example above, three monitors are connected to the TVS-1000
system and the production module, multiview and program view are displayed.
47