Auto Play - Datavideo TVS-1000 Instruction Manual

Locate the control panel on the right of the
"Placement Configuration Window". X and Y are
the adjustable coordinates. The user can use the
joystick to configure the PAN and TILT settings.
The zoom slide bar on the right adjusts the zoom
in/out values accordingly. The user can also use
the mouse scroll wheel to adjust the zoom in/out
values.
An additional button,
restoration of the default settings.
The preview window is on the left of
the"Placement Configuration Window", allowing
the user to preview the changes. Click the "Close" button to shut down the "Placement
Configuration Window" after you have configured the desired placement settings.

5.4.3 Auto Play

Auto Play generates the animated PTZ transition effect. If the AutoPlay function is switched on,
the camera movement is smooth, animated. The transition time is adjusted by controls located
on the right of the phase previews (Time, Frame). If the AutoPlay button is turned off, the
camera position is switched 'sharply' (cut effect without animation). To make things easier, three
default transition duration times between phases have been defined: F (1 s), M (3 s), S (5 s). For
every newly imported studio, default phase settings are defined: the first phase has zero zoom
(0%), the second phase a 50% zoom, and the third phase a 100% of the maximum zoom.
Default, enables
S: Slow speed (5 seconds by default)
M: Medium speed (3 seconds by default)
F: Fast speed (1 second by default)
42