Import; Placement - Datavideo TVS-1000 Instruction Manual

5.4.1 Import

The user may import virtual set background from the hard disk drive (HDD). Click on the Import
button to open a window that displays a list of directories containing virtual set backgrounds.
Preview of the virtual set background is available on the right of the directories listing window.
Choose the desired dvsx file to the selected M/E bin. Click on M/E1-4 to view loaded virtual
studios on Preview window of the Multi-View Area.
File Location: D:\TVS-1000\Sets

5.4.2 Placement

Phase is defined as the virtual camera position in a virtual studio. Each virtual scene (M/E1 –
M/E4) can be assigned three phases (phase 1 – 3). Click on any of the three phase windows to
configure the image phase settings. The current phase is highlighted with an orange bar above
the preview window as shown in the diagram below.
Placement function allows the user to customize the phases, i.e. change the camera position
manually. Possible virtual camera movements are Pan, Tilt and Zoom. To set the phase, click on
the "Placement" button to open the "Placement Configuration Window" as shown in the
diagram below, which allows the user to select desired PAN, TILT and ZOOM values.
41