Datavideo TVS-1000 Instruction Manual page 27

Create: Add graphic layers
Delete: Remove graphic layers
Raise:
Lower:
To start editing, at the top-left corner of the layers pane, locate the create icon
click on it to select the layers. A dialogue box "Select layer type" will open, on which the user will
be able to find four layer types .
Source A (Talent): Camera shot layer
•
Source B (Screen): A secondary screen embedded in virtual set
•
Static Logo: Logo layer (adjustable images)
•
Studio Layer: Graphic layers (image will be stretched to the current display resolution)
•
Please note that the suggested resolution of the studio layer is 2880 x 1620 (16:9). This is the
standard virtualset resolution in TVS-1000. You can of course use other resolutions but you will
need to fine-tune your image later.
Select "Studio Layer" to browse the hard disk and click on the "Add" button
an image file to VIRTUALSET maker from the disk. Browse the disk for the files and single clicking
on the file name allows you to preview the image in the preview area.
Move a graphic layer up a layer
Move a graphic layer down a layer
27
and
to import