Use Customized Virtualset - Datavideo TVS-1000 Instruction Manual

4.4

Use Customized Virtualset

Once the virtualset is imported into the production live module, you can preview your virtualset
in the PVW screen. Configure your virtual studio in the Virtual Studio Configuration Panel. Each
phase corresponds to a virutal camera position. The user can switch between phases by clicking
on phase windows, which is similar to the "cut transition" effect on a switcher.
The virtual studio configuration panel is located at the bottom left-hand corner of the screen.
Two rows of buttons located below the three phase windows serve the purpose of allowing the
user to select talent material source and green screen material source. As depicted in the
diagram above, row A is for talent material source selection and row B is for green screen
material source selection.
34