Port Ethernet Switch Specifications - OneAccess One80XM Installation Manual

27 One80XM
Installation Guide
4.5

4 port Ethernet Switch Specifications

• Number of ports: 4
• Connectors: RJ45 (EIA/TIA 568B)
• Applicable standards: IEEE 802.3 (10Mbps Ethernet), IEEE 802.3u (100Mbps Ethernet)
• Characteristics:
- 10 / 100 Mbps auto-sense
- Half or full duplex
- Auto-negotiation
- Auto detection of crossover/straight cable (auto MDI/MDIX detection)
• Meaning of LED colours:
- Lit green LED: link active
- Blinking yellow LED: traffic in progress
• The layout of the connectors is identical to the LAN interface, refer to
tions on page 25: transmission pairs 1-2, receive pairs 3-6
• Cable to be used: shielded crossover/straight cables with 4 twisted pairs
Chapter 4
Interface Description
4.3 - LAN Interface Specifica-